Pneumatic needle hammer, 2 heads with 19 needles each

Pneumatic needle hammer is designed to remove rust, welding slag, plaster, paint, concrete and other coatings from metal surfaces. The device is used with compressed air and is supplied with a 10 m pneumatic hose.

The pistol-shaped tool has a replaceable needle head. The set includes two heads, each with 19 needles, with a diameter of 3 mm and a length of 180 mm. The air connection is 1/4", the hose connection is 3/8", and the kit also includes a 1/4" EU type quick connector.

Main product features

• Working frequency: 4000 strokes per minute
• Working pressure: 6.3 bar
• Air consumption: 260 l/min
• Vibration level: 8.6 m/s²
• Sound pressure level: 99 dB
• Clean air without condensation and oil mist is required
• Recommended compressor tank volume: not less than 50 l

Technical information

• Pneumatic hose length: 10 m
• Maximum hose working pressure: 20 bar at 20 °C
• Hose material: PVC with reinforced fabric coating
• Hose inner diameter: 10 mm, outer diameter: 13 mm

Complete set

• Needle hammer
• 2 needle heads with 19 needles each, Ø 3 mm
• Compressed air connection
• Allen key
• 10 m pneumatic hose